Skip to Content Skip to Navigation

The Beaver Resilient Seated Dual Plate Check Valve has a one-piece body that is lightweight yet strong for a long and trouble-free service.

It has two spring-assisted discs that open towards the flow direction based on the force of the fluid. The self-shutting discs close as flow drops, efficiently preventing backflow in a piping system.

The discs only travel a very short distance to open and close, ensuring minimal fluid resistance and smooth flow through the valve. The check valve eliminates water hammer with spring-assisted discs that close quickly and aren’t dependent on reverse pressure to shut. Soft seats provide further leakage prevention.

Use this Beaver dual plate check valve to protect equipment or the piping system from contaminated and unwanted reverse flow.

Technical specifications

Brand

Beaver

Model

C11 (16 bar)
C12 (10 bar)

Size range

DN50–600 (2–24”)

Pressure class

DN50–300: 16 bar (232 psi)
DN350–600: 10 bar (145 psi)

End connections

Wafer to suit ASME Class 125/150

Face to face

EN558-1, Table 16

Material specifications

Body

Cast iron, CF8M stainless steel, ductile iron

Disc

CF8M stainless steel

Stem, spring

316 stainless steel

Seat

EPDM, Viton, Buna, metal

Bushing

PTFE

How we help you choose the right valves:

1. Tell us what you need

Talk to our experts about your application, which valves and controls you need, and any repair or maintenance concerns.

2. Choose the right solution

We’ll do all the analysis, discuss the options with you, and make a recommendation—the valves we’d choose in your shoes.

3. Get the job done

Get the right valves for the job, fitted out, tested, and ready to install. We’ve got your back with ongoing repairs and maintenance.

Talk to a valve specialist

Got questions? Need advice? Our valve specialists can give you practical advice to help you get on with the job.

Valve automation & repairs

Actuators. Positioners. Controls. Valve repairs. Whatever you need, our valve workshop can handle it.