Skip to Content Skip to Navigation

This range of Beaver ball valves is suitable for either isolation or flow control depending on the body design. The stainless steel body is available in a one-piece, two-piece, or three-piece configuration with threaded or socket weld end connections.

A resilient seat provides a bubble-tight shut-off with zero leakage. Available from DN8–100, this ball valve covers most requirements in water, oil, gas and chemical process applications.

Technical specifications




B01 (1-piece reduced port)
B02 (2-piece full port)
B03 (3-piece full port)
B04 (3-piece full port with ISO mounting pad)

Size range

DN8–100 (¼–3”)

Pressure class

69 bar (1000 psi)

End connections

Threaded BSP
Threaded NPT
Socket weld

Temperature range

-40°C to +180°C

Actuator options

Gear operated

Material specifications

Body, ball, and bonnet

CF8 (304)
CF8M (316)



Seal ring and packing


How we help you choose the right valves:

1. Tell us what you need

Talk to our experts about your application, which valves and controls you need, and any repair or maintenance concerns.

2. Choose the right solution

We’ll do all the analysis, discuss the options with you, and make a recommendation—the valves we’d choose in your shoes.

3. Get the job done

Get the right valves for the job, fitted out, tested, and ready to install. We’ve got your back with ongoing repairs and maintenance.

Talk to a valve specialist

Got questions? Need advice? Our valve specialists can give you practical advice to help you get on with the job.

Valve automation & repairs

Actuators. Positioners. Controls. Valve repairs. Whatever you need, our valve workshop can handle it.