The Abrasiguard AE-Series Polyurethane-Lined Pipe is Y-shaped or lateral spool used to channel slurry from one pipeline to two separate pipelines, or vice versa. It can be custom-built to any length and pre-specified angle.
Its Abrasiguard AX-100 high-performance polyurethane lining prevents gouging caused by higher energy particles. It’s designed to transfer slurry and fluids that require an internal corrosion liner. Such applications typically involve high pressure, scaling, or abrasive solids.
This Abrasiguard pipe Y-piece/lateral spool is commonly used in mineral processing plants, concentrate pipelines, tailings pipelines, oil sands pipelines, and dredging.
Technical specifications
Brand
Model
Pipe size
Non-standard sizes available (where required to optimise hydraulic performance)
Design codes
Contact us for other requirements
Pipe types
Pipe specifications
Contact us for other requirements
Pressure rating
Temperature rating
End connections
Flanged (fixed or swivel)
Grooved (roll or cut)
Threaded
Fully welded
Custom
Flange types
Groove types
Thread types
Extra options
Wear monitoring system (plug-only or push-button)
Material specifications
Pipe material
Stainless steel (SS304, SS316)
Exotic alloy
External coating
Zinc or zinc-aluminium primer
Epoxy based (single or multi-layer)
Polyurethane based (single or multi-layer)
Custom system
Internal lining specifications
AX-100 high-performance polyurethane
Suitable for turbulent and non-turbulent slurry regimes
Suitable for small and large particle slurry types
Suitable for slurry velocities to 10m/s as standard
Suitable for straights (low 0–10° imp. angle wear)
Suitable for bends/fittings (medium 10–45° impingement angle wear)
Strong adhesion to substrate (chemically bonded)
Suitable for long-term immersion (hydrolysis-resistant)
Compatible with most carrier fluids and reagents (consult factory for chemical compatibility with specific media)
Very low wet friction coefficient (very low surface roughness)
Resistant to dissolved oxygen (nil corrosion allowance required)
Temperature range (wet): +20 to +40°C (transient to +60°C)
Temperature range (dry): 0 to +60°C (transient to +80°C)
AX-100XT high-performance polyurethane (XT upgrade)
Upgrade: Enhanced temperature range
Upgrade: Enhanced adhesion (corrosive and/or high temperature)
Upgrade: Enhanced resistance to “cold wall” effect
Upgrade: Enhanced resistance to long-term immersion
Temperature range (wet): 0 to +65°C (transient to +85°C)
Temperature range (dry): -60 to +80°C (transient to +120°C)
How we help you choose the right lined pipe spools:
1. Tell us what you need
Tell us about your plant. Do you have high wear problem areas? What other issues do you need to overcome? Let’s work back from there.
2. Choose the right solution
Weigh up the options. We’ll do the analysis, discuss the options with you, and make a recommendation—the pipes we’d choose in your shoes.
3. Get the job done
Get the right lined piping for the job, on time and to spec. We’ve got your back all the way, including installation and commissioning support.
You might also be interested in
DeGrussa Copper Mine – Complete Tailings Storage Solution
Cloudbreak Mine – Victaulic Pipes and Fittings for Plant Upgrade
We're here to help
Got questions? Need advice? Tap into our experience and get specialist advice from our friendly team.
Slurry piping audits
Solve slurry piping maintenance problems for good. No more leaking pipes, no more unplanned shutdowns.