Skip to Content Skip to Navigation

The CMO L Knife Gate Valve has a split cast iron body that is fully machined and reinforced to form a solid body. A through-conduit gate provides continuous flow with no cavities or turbulence. This enables true bidirectional sealing at the same pressure in either flow direction.

The half-moon shape of the gate allows it to cut through thick media. Internal slides allow the gate to smoothly open and close. Dual glands eliminate fluid discharge during the open/close cycle.

Choose from three dual seat options which can be further reinforced with a deflector cone to protect the valve from abrasion and channel the flow to the centre of the bore.

The CMO L Knife Gate Valve is suitable for dry solids and liquids with up to 20% solids concentration. This valve is also recommended non-horizontal installation as the dual sleeves keep the ported gate exactly in column.

Technical specifications

Brand

CMO

Model

L series

Size range

DN50–2000 (2–80”)
Contact us for bigger sizes

Pressure class

10 bar (DN50–150)
8 bar (DN200)
6 bar (DN250–300)
5 bar (DN350–400)
3 bar (DN450–600)
2 bar (DN700–1400)
Contact us for other pressure classes

End connections

Wafer

Actuator options

Handwheel
Gear operated
Pneumatic
Hydraulic
Electric

Material specifications

Body

Standard: GJL-250 cast iron and CF8M stainless steel
On request: GJS-500 nodular cast iron, A216WCB carbon steel, and stainless steel alloys (AISI 316 Ti, Duplex, 254 SMO, Uranus B6)

Gate

Standard: AISI 304 and 316 stainless steel
Contact us for other materials, coatings, and finishes

Seat and max temperature

EPDM, nitrile (90°C)
Silicone (200°C)
Viton (210°C)

How we help you choose the right valves:

1. Tell us what you need

Talk to our experts about your application, which valves and controls you need, and any repair or maintenance concerns.

2. Choose the right solution

We’ll do all the analysis, discuss the options with you, and make a recommendation – the valves we’d choose in your shoes.

3. Get the job done

Get the right valves for the job, fitted out, tested, and ready to install. We’ve got your back with ongoing repairs and maintenance.

Talk to a valve specialist

Got questions? Need advice? Our valve specialists can give you practical advice to help you get on with the job.

Valve automation & repairs

Actuators. Positioners. Controls. Valve repairs. Whatever you need, our valve workshop can handle it.